Accessories

Maintenanceunit type VWE for use in dry sprinkler systems (stationary water extinguishing systems) as low-point drainage. The maintenance unit type VWE enables the condensate from dry sprinkler systems to be drained without interrupting operation.

The maintenance unit type VWE is available with / without filler neck. The maintenance unit type VWE can be filled with antifreeze via the filler neck. For use in frost-prone areas of a dry sprinkler system. The maintenance unit type VWE without filler neck is used in areas of dry sprinkler systems that are not at risk of frost.
Approvals: VdS/FM applicable

Drilling jig type 1 is a mobile jig for use on construction sites. Its professional handling enables holes to be drilled centrally and perpendicular to the pipe axis. This makes it particularly suitable for drilling the holes required for tapping clamps.

The type 1 drilling jig can accommodate drilling machines with a clamping neck Ø of 43 mm. The type 1 drilling jig is suitable for pipes from 1“ - 2½”. Maximum drilling Ø = 30 mm.

VIROTEC® thread sealant is a liquid, anaerobic sealing material for sealing metal pipe threads in accordance with DIN 2999 (ISO 7-1). Due to its simple and fast processing, it is a cost-effective alternative to conventional sealants such as hemp or Teflon tape.

When the threads are screwed together, the product spreads between the threads and hardens completely after 8 - 24 hours. This ensures a secure seal up to a pressure of 100 bar.

VIROTEC® thread sealant is available in two container sizes, VFD-50 with 50 ml and VFD-250 with 250 ml content.