Fitting for flexible hose

The VIROTEC® reducing fitting is used as a universal addition to the VIROTEC® flexible hose types VX-G2/-S2, as a special version. The component is made of steel with a galvanized surface. By combining several flexible hose dimensions with different reducing fittings, a very extensive range of ready-to-install sprinkler hoses is created.

The reducing fitting for sprinklers 1/2“ is available in the nominal sizes DN20 with hose connection R 3/4” (AG) or DN25 with hose connection R 1” (AG). The designs are straight or 90° angled. There are also three different lengths (short / medium / long). The shaft cross-section is 8-edge, SW27 mm. In combination with a VX-G2/-S2 flexible hose, the product is VdS and FM approved.

The VIROTEC® reducing fitting is used as a universal addition to the VIROTEC® flexible hose types VX-G2/-S2, as a special version. The component is made of steel with a galvanized surface. By combining several flexible hose dimensions with different reducing fittings, a very extensive range of ready-to-install sprinkler hoses is created.

The reducing fitting for sprinklers 3/4“ is available in nominal size DN25 with hose connection R 1” (male). The designs are straight or angled at 90°. There are also three different lengths (short / medium / long). The shaft cross-section is round, diameter 34 mm. In combination with a VX-G2/-S2 flexible hose, the product is VdS and FM approved.

The VIROTEC® downpipe serves as a universal supplement to the VIROTEC® flexible hose types VX-G2/-S2, as a special version. The component is made of steel with a galvanized surface. By combining several flexible hose dimensions with different downpipes, a very extensive range of ready-to-install sprinkler hoses is created.

The downpipe for sprinklers 1/2“ is available in the nominal sizes DN20 with hose connection R 3/4” (AG) or DN25 with hose connection R 1” (AG). The designs are straight or angled at 90°. The overall length is freely selectable, but up to a maximum of 300 mm. The shaft cross-section is round, diameter 27 mm (for DN20) or 34 mm (for DN25). In combination with a VX-G2/-S2 flexible hose, the product is VdS and FM approved.

The VIROTEC® downpipe serves as a universal supplement to the VIROTEC® flexible hose types VX-G2/-S2, as a special version. The component is made of steel with a galvanized surface. By combining several flexible hose dimensions with different downpipes, a very extensive range of ready-to-install sprinkler hoses is created.

The downpipe for sprinklers 3/4“ is available in nominal sizes DN25 with hose connection R 1” (AG). The designs are straight or angled at 90°. The overall length is freely selectable, up to a maximum of 300 mm. The shaft cross-section is round, diameter 34 mm. In combination with a VX-G2/-S2 flexible hose, the product is VdS and FM approved.

The VIROTEC® clean room downpipe is used as a universal supplement to the VIROTEC® flexible hose types VX-G2/-S2, as a special version. The component consists of the stainless steel drop tube, the spring, the spring tensioner and the washers. By combining several flexible hose dimensions with different clean room downpipes, a very extensive range of ready-to-install sprinkler hoses is created.

The clean room downpipe for sprinklers 1/2“ is available in nominal sizes DN20 with hose connection R 3/4” (male). The designs are straight or angled at 90°. There are also two different lengths (270 / 370 mm). The shaft cross-section is round, diameter 27 mm. In combination with a VX-G2/-S2 flexible hose, the product is VdS and FM approved.

The VIROTEC® clean room downpipe is used as a universal supplement to the VIROTEC® flexible hose types VX-G2/-S2, as a special version. The component consists of the stainless steel drop tube, the spring, the spring tensioner and the washers. By combining several flexible hose dimensions with different clean room downpipes, a very extensive range of ready-to-install sprinkler hoses is created.

The clean room downpipe for sprinklers 3/4“ is available in nominal sizes DN25 with hose connection R 1” (male). The designs are straight or angled at 90°. There are also two different lengths (270 / 370 mm). The shaft cross-section is round, diameter 34 mm. In combination with a VX-G2/-S2 flexible hose, the product is VdS and FM approved.